重烧镁砂都有哪些规格 What are the specifications of reburned magnesia
发布日期：2017-05-04 00:00 来源：http://www.ykbhlm.com 点击：
重烧镁砂主要的规格有0mm-0.5mm；0mm-1mm；1mm-3mm；3mm-5mm；5mm-10mm；10mm-30mm；50mm-200mm；200mm-500mm；重烧镁砂产品主要采用高含量菱镁矿石经过铁皮竖窑煅烧而成。 重烧镁砂它是制造生产不定型耐火材料的理想原料，以它为原料 生产的各种耐火材料主要用于钢铁工业，也用于玻璃，水泥，和有色冶金行业。因重烧镁砂具有良好的高温抗折强度，抗渣性能和抗腐蚀性能，可提高炼钢炉炉衬的使用寿命，所以被广泛的用于炼钢平炉，电炉炉底和捣打炉衬。炼钢炉的炉衬耐火材料，另外也是制造耐火砖不定型耐火材料的优质理想材料。
What are the specifications of reburned magnesia?
The main specifications of reburned magnesia are 0mm-0.5mm; 0mm-1mm; 1mm-3mm; 3mm-5mm; 5mm-10mm; 10mm-30mm; 50mm-200mm; 200mm-500mm; reburned magnesia products mainly use high content Magnesite ore is calcined by iron shaft kiln. Reburned magnesite is an ideal raw material for the manufacture of amorphous refractory materials. Various refractory materials produced from it are mainly used in the steel industry, but also used in glass, cement, and non-ferrous metallurgy industries. Because reburned magnesia has good high-temperature flexural strength, slag resistance and corrosion resistance, which can improve the service life of steelmaking furnace linings, it is widely used in steelmaking open furnaces, electric furnace bottoms and ramming furnace linings. The furnace lining refractory of the steelmaking furnace is also an ideal high-quality material for the manufacture of refractory bricks.
To distinguish reburned magnesia, you only need to know his production process. The production equipment used for reburned magnesia is a iron shaft kiln. 46% content of magnesite is calcined at 1600 ℃ -1800 ℃. In this case, it can be judged that it is reburned magnesia. The basic main types of reburned magnesia are 80%, 85% and 90%. The main color of reburned magnesia is reddish brown. Reburned magnesia products Widely used in magnesia brick, magnesia-aluminum brick, magnesia-chrome brick, spraying material, castable, dry material, smearing material, filling material, asphalt, casting, fire-proof and heat-preservation material, flux auxiliary material, electrical steelmaking furnace, heating furnace , Rotary furnace, steel making, electric furnace bottom and ramming furnace lining.
The heavy burned magnesia is mainly made of 46% magnesite ore, calcined at 1600 ℃ -1800 ℃ through a layer of coal and a layer of magnesite in the iron kiln. The production process is that two tons of ore produce one ton of heavy burned magnesia, and the product is divided into three grades; one, the burned magnesite before the kiln, the second, the under burned magnesia, and the third, the large burned magnesia. The main color of the reburned magnesite is hard reddish brown. The features of the reburned magnesite are high fire resistance.
Reburned magnesia product use: The product is used for magnesia brick, magnesia-aluminum brick, magnesia-chrome brick, spraying material, pouring material, dry material, smearing material, filling material, asphalt, casting, fire prevention and heat insulation material, flux auxiliary material, Electric steelmaking furnace, heating furnace, rotary furnace, steelmaking, electric furnace bottom and ramming furnace lining.
- 2016-2022年中国轻重烧镁行业市场供需预测及投资规划建议研究报告 2016-2022 China light and heavy magnesium industry market supply and demand forecast and investment planning recommendations research report
- 重烧镁砂企业靠廉价劳力之路将越走越窄 Reburned magnesite enterprises will be narrower and cheaper by relying on cheap labor
- 重烧镁砂与大结晶电熔镁砂之间的区别 Difference between reburned magnesia and large crystalline fused magnesia
- 商务部印发《2015年度重烧镁砂、滑石第二次出口配额 Ministry of Commerce issued the second export quota of heavy burned magnesia and talc in 2015
- “重烧镁产业节能减排技术创新服务平台 "Reburned magnesium industry energy saving and emission reduction technology innovation service platform" project passed the acceptance”项目通过验收